UB-680C / UB-680F: Optimizing refrigerants and efficient condensing technology to help upgrade commercial cold chain equipment

In the commercial refrigeration industry, the choice of refrigerant is one of the key factors in refrigeration efficiency and environmental impact. The 1 door stainless steel upright full door chiller series products have made significant optimizations in this regard, using environmentally friendly refrigerants R134a and R404A. These two refrigerants perform well in the refrigeration process, have low environmental impact and low greenhouse gas emissions, and meet modern environmental protection requirements.
R134a is a Freon substitute widely used in refrigeration and air-conditioning equipment. Its low global warming potential (GWP) makes it the first choice for various environmentally friendly refrigeration equipment. R404A, on the other hand, has been widely used in food refrigeration and freezing equipment due to its excellent performance in low temperature environments, especially in scenes where lower temperature conditions are required in the food industry. By choosing these two high-efficiency refrigerants, 1 door stainless steel upright full door chiller has significantly improved energy saving and also provided global users with refrigeration solutions that meet international environmental standards.
Using high-efficiency and environmentally friendly refrigerants, 1 door stainless steel upright full door chiller can maintain low energy consumption in different environments while providing stable refrigeration effects. This makes it possible for the product to be widely used in many regions around the world, whether in the hot and humid environment of Southeast Asia or the temperate climate of North America and Europe, it can operate stably to meet various commercial needs.

One of the core technologies of the refrigeration system is the efficiency of the condensation and evaporation process. 1 door stainless steel upright full door chiller adopts innovative condensation and evaporation technology, especially in the optimization of heat exchange efficiency, which greatly improves the refrigeration capacity and energy utilization efficiency of the equipment.
In terms of condensation technology, 1 door stainless steel upright full door chiller adopts a combination design of hydrophilic aluminum foil and internally threaded copper tube. This design improves the heat exchange efficiency of the condenser. The hydrophilic property of aluminum foil enables water vapor to quickly exchange heat with the air, increasing the heat exchange surface area and thus improving the condensation efficiency. The design of the internally threaded copper tube makes the flow of the refrigerant in the tube more uniform, reduces the resistance of the fluid, and at the same time increases the contact area between the refrigerant and the tube wall, so that heat can be transferred more efficiently.
This efficient condensation system enables 1 door stainless steel upright full door chiller to maintain a stable cooling effect when operating at high loads. Even in high temperature and high humidity environments, the equipment can ensure stable operation without performance degradation or failure due to overheating. This efficient condensation system makes the equipment more reliable and durable in commercial applications, reduces maintenance frequency and extends the service life of the equipment.
In terms of evaporation technology, 1 door stainless steel upright full door chiller has also been optimized. The design of the evaporator fully considers the heat absorption efficiency during the refrigeration process, improves the surface area and flow efficiency of the evaporator, and enables the refrigerant to quickly absorb heat inside the equipment and quickly transfer the cooling effect to the refrigeration or freezing area. This optimized evaporation technology can not only improve the refrigeration efficiency of the equipment, but also reduce energy consumption, further improving the cost performance of the product.
By adopting the condensation and evaporation system of hydrophilic aluminum foil and internally threaded copper tube, the cooling effect of 1 door stainless steel upright full door chiller is greatly improved. In actual application, the optimization of this condensation and evaporation system can maintain low energy consumption and high efficiency in extreme environments, meeting customers' requirements for high efficiency and reliability of commercial refrigeration equipment.

1 door stainless steel upright full door chiller has not only been fully optimized in condensation and evaporation technology, but also fully considered energy saving in the overall design. Through optimized condensation and evaporation technology, combined with efficient refrigerants, this equipment can significantly reduce energy consumption without sacrificing cooling effect. Whether in hot summer or in a commercial environment where doors are frequently opened, 1 door stainless steel upright full door chiller can still provide excellent cooling effect while reducing power consumption and operating costs. 1 door stainless steel upright full door chiller is also equipped with a digital temperature control system. Through intelligent temperature control, the equipment can adjust the operating mode according to needs, avoiding unnecessary energy waste. This intelligent temperature control design can automatically adjust the cooling intensity according to the specific needs of the commercial environment, achieve more precise temperature control, ensure temperature stability, and achieve energy saving effects.